产品简介

使用这些金刚石电镀的刀片切开紧密成角落的地方是必要的，并且上司或锁住螺母将得到就象的地方。 刀片和纺锤在一件被做并且提出绝对充足的边对工作。 这些金刚石纺锤锯对旁边轮幅也是可利用的。 一定数量普遍的大小在库存举行，但是缺一不可的纺锤看见的金刚石可以被制造到顾客要求。

选择： 直径- 25 - 75mm配置-

连续的外缘或边讲了话

注： 在各种各样的金刚石等级和宽度能被供应。 所有锯被涂上一有名无实2mm下来边。 当预定时，请陈述柄直径和长度。

在36/44沙粒涂上的锯是大约0.4mm广泛比有名无实的宽度。

英文介绍

These diamond electroplated blades are used where it is necessary to cut close into a corner and where a boss or locking nut would get in the way. The blade and spindle are made in one piece and present an absolutely flush side to the work. These diamond spindle saws are also available with side spokes. A number of popular sizes are held in stock, but the diamond integral spindle saw can be manufactured to customer requirements.

OPTIONS: Diameters - 25 - 75mm Configuration -

Continuous Rim or Side Spoke

Note: Can be supplied in a variety of diamond grades and widths. All saws are coated a nominal 2mm down the sides. Please state shank diameter and length when ordering.

Saws coated in 36/44 grit are approximately 0.4mm wider than nominal width.