产品简介

气动针式除锈机DN30/3(JEX-28)是最强大和最通用的除锈工具，被证明可用于除锈和清洁小面积的锈膜、油漆、蚌壳涂层、矿渣等。该针枪用于航运、船厂、小规模的防腐工作，如桅杆或集装箱，或用于机械工程。

空气针式除垢器DN30/3（JEX-28）--与廉价工具无法相比--强大、坚固、持久耐用

空气针式除垢器DN30/3(JEX-28)是普遍可用的，其30毫米的针头行程是我们最强大的手枪式针式除垢器，是用手工工具除锈的最佳选择。3.5公斤的重量和坚固的设计可以在使用中完美地摆放。由于附件丰富，可以使用Ø 2 mm、Ø 3 mm或Ø 4 mm的针头。您可以用标准针加工所有普通材料，也可以用特殊的VA针加工不锈钢，我们甚至可以为您提供由铜-铍制成的无火花针。长度从180毫米到800毫米不等。其性能只有低振动的DN3000A才能达到顶峰。针式除垢机配备了28根标准针（Ø 3 x 180 mm），可以可靠地去除金属表面的油漆、沉积物和闪锈。还包括一个持针器和14根标准针（Ø 4 x 180 mm）。要转换到Ø 2毫米的针，你需要一个合适的针支撑器，转换或在磨损的情况下换针是快速而简单的。您只需松开外壳上的一个螺丝，取下盖子，就可以从工具上取下针架和针，并进行更换。由于附件种类繁多

英文介绍

The air operated needle scaler DN 30/3 (JEX-28) is the most powerful and versatile tool for derusting , proven for derusting and cleaning of small surfaces from rust film, paint, mussel coating, slag and much more. The needle gun is used in shipping, shipyards, for small-scale corrosion protection work, e.g. on masts or containers, or in mechanical engineering.

Air needle scaler DN30/3 (JEX-28) - no comparison to cheap tools - powerful, sturdy, long-lasting

The air needle scaler DN 30/3 (JEX-28) is universally usable and with 30mm needle stroke our most powerful needle scaler in pistol form, optimal for derusting with a hand tool. The weight of 3.5 kg as well as the sturdy design can be perfectly staged in use. Thanks to extensive accessories, the use of Ø 2 mm, Ø 3 mm or Ø 4 mm needles is possible. You can process all common materials with the standard needles, special VA needles are available for stainless steel and we can even offer you spark-free needles made of copper-berryllium. The lengths range from 180mm to 800mm. The performance is only topped by the low-vibration DN3000A. The needle scaler is equipped with 28 standard needles (Ø 3 x 180 mm), which reliably remove paint, deposits and flash rust from metal surfaces. A needle supporter and 14 standard needles (Ø 4 x 180 mm) are included. For the conversion to Ø 2 mm needles, you need a suitable needle supporter, and the conversion or needle change in case of wear is made quick and easy. All you have to do is loosen one screw on the housing, remove the cover and you can remove the needle carrier and needles from the tool and replace them. Thanks to the extensive range of accessories