产品简介

Explorer RTE气体传感器系列允许在ATEX分类区域检测有毒气体。

RTE 1001是一个氧气(O2)气体传感器，量程为0-30%，它配备了一个4-20mA的变送器，装在防爆外壳中。

发射器的PCB板上有一个用于服务操作的本地显示，它还有一个用于温度变化补偿的特殊电路。

主要特点

电化学电池技术

用于¾"NPT电缆接头的防爆铝容器

用于ATEX 94/9/EC安全系统 ATEX 94/9/EC

INOX钢制传感器

完整的配件系列

非常好的价格-质量关系

非常快的反应

应用范围

氧气传感器，具有ATEX认证，和4-20mA变送器。

ISSeP04ATEX036 - II 2GD - EEx d IIC T6 - IP 6X - T85°C - CE.

RTE Sériés传感器允许在防爆区对这些气体进行连续监测，并根据ATEX指示提供一个压铸铝锡容器。

相反，RTS sériés传感器可以只在安全区域使用。

一些传感器只有这个版本；而对于其他不同的气体检测，你可以使用两种解决方案。有毒气体检测的单位是ppm（百万分之一），而氧气浓度的单位是体积百分比。关于氧气，有两种不同的传感器可供选择：经典的传感器，范围为0-30%体积；KE-25型传感器，用于在富含二氧化碳（CO2）的环境中测量氧气，直到100%体积。

安装在发射器PCB卡上的内部显示屏，使检查重复程序、测试和校准变得容易，只需通过3个按钮就可以使用。

英文介绍

Explorer RTE gas sensor series permit to detect toxic gases in ATEX classified areas.

RTE 1001 is an Oxygen (O2) gas sensor with range 0-30% vol and it comes complete with a 4-20mA transmitter in a Exd enclosure.

Transmitter PCB board has a local display for service operations and it also has a special circuitry for temperature variation compensation.

Main features

Electrochemical cell technology

Ex Aluminum Container for ¾” NPT cable gland

For ATEX 94/9/EC security systems ATEX 94/9/EC

INOX Steel Sensor

Complete series of accessories

Very good price-quality relationship

Very fast response

Applications

Oxygen gas sensor, with ATEX approval, and 4-20 mA transmitter.

ISSeP04ATEX036 - II 2GD - EEx d IIC T6 - IP 6X - T85°C - CE.

RTE Sériés Sensors permit the monitoring in continuous of these gas in Exd-classified Areas, and are supplied with a die-cast aluminium tin container according to the ATEX indications.

RTS sériés sensors, on the contrary, can be used just in the safe areas.

Some sensors are available just in this version; while regarding other different gas détections, you can use both solutions. The toxic gas détection is been in ppm (parts for million), while the oxygen concentration is shown in % volume.

Regarding the oxygen, 2 different sensors are available: the classic sensor with range 0-30% vol. and the KE-25 type sensor, for the oxygen measurements till 100% vol. in environments that are rich of carbon dioxide (CO2).

The inner display, mounted on the transmitter PCB card, makes easy the check recurring procedures, the tests and the calibration, just through the 3 buttons use.