产品简介

涵盖了环氧树脂和聚氨酯复合树脂和涂料的广泛应用范围

通用配比器系统涵盖了环氧树脂和聚氨酯复合树脂和涂料的广泛应用范围。空气马达驱动一个重型摇臂连杆驱动装置，驱动两个双作用往复式活塞泵。树脂侧是固定的，固化剂侧是可调的，使用上下螺丝/夹块来设置比例范围。

根据所需的流速和比率，有一系列的流体部分和分配枪可以满足您的需求。不锈钢流体部分系列包括全氟橡胶软座，是改善粘度很低的硬化剂的计量的理想选择。

UPLS-1000流体部分在每分钟40次循环的情况下，输出范围超过4加仑（15.14升）。例如，与UPLS-4600硬化剂流体部分搭配，并以3:1的比例设置，每分钟总共可输出5.4加仑（20.44升）。

大多数系统的标准配置是用户友好的专业再循环枪。这使得在更换材料容器、比例检查、关闭和启动过程中，可以很容易地将空气从系统中清除，而不会造成材料浪费。大容量自动1:1专业喷枪也是与该系统一起使用的理想选择。带有硬化440不锈钢阀杆的不锈钢枪头，标配有新的玻璃填充特氟隆阀杆密封件。对于较低的流速，以及需要手持式喷枪的应用，我们推荐经典的1:1专业喷枪。

英文介绍

Covers a wide application range for epoxy and urethane laminating resins and coatings

The Universal Proportioner System covers a wide application range for epoxy and urethane laminating resin and coatings. The air motor drives a heavy duty rocker arm linkage drive which drives two double acting reciprocating piston pumps. The resin side is fixed and the hardener side is adjustable, using an upper and lower screw/clamp block to set the ratio range.

Depending on desired flow rates and ratios, a series of fluid sections and dispense guns are available to fit your needs. The stainless steel fluid section series includes perfluoroelastomer soft seats which are ideal for improved metering with very low viscosity hardeners.

The UPLS-1000 fluid section alone has an output range of over 4 gallons (15.14 liters) at 40 cycles per minute. Paired with the UPLS-4600 hardener fluid section, for example, and set at a 3:1 ratio, would total 5.4 gallons (20.44 liters) per minute.

Standard on most systems is the user-friendly Pro Recirculation Gun. This allows an easy way to purge air out of the system during material container change, ratio checks, shut-down and start-up procedures with no material waste. The High-Volume Automatic 1:1 Pro Gun is also ideal to use with this system. The stainless steel head with hardened 440 stainless steel valve rod comes standard with a new glass filled Teflon valve rod seals. For lower flow rates, and applications that require a hand held gun, we recommend the classic 1:1 Pro Gun.