产品简介

MVP的切碎/冲洗设备的特点是专业系统，具有可靠的低压输送，易于设置，易于操作，易于维护。Pro泵送系统采用重型不锈钢催化剂泵，使操作人员能够轻松地调整首选设置。催化剂设置可以通过一个简单的销子调整。

MiniPro斩拌机设计用于处理中低产量，当不需要UltraMAX™或Patriot™系统的高产量时，MiniPro斩拌机非常适合从手工铺设转换为机械化。所有专业系列斩拌机都使用V-Pro 2000高速换向阀，以确保从上行到下行的平稳转换。

ATC-4000喷枪被推荐用于该系统。可提供内部和外部混合的配置。

专业切碎/润湿系统

规格。

输出能力：约1-5磅/分钟。(.45 - 2.3 kg/min.)

催化剂百分比：0.5%至3%（体积）。

空气消耗量。12 CFM (340 L/min.)

泵比：4:1和11:1

最大空气输入压力：100 psi

选项。

CFH-2000

CB-8000监控器

CTS-9000 催化剂报警器

Quick Shot 桶装分配系统

通过Quickshot实现出色的树脂和催化剂计量，同时大幅降低通常与桶装和刷子应用相关的材料和劳动力成本。迅速、更均匀地分配树脂和催化剂，清理工作少，排放量低。

该系统的特点包括。

精确的配比，没有麻烦

无滴漏，易于使用的球阀可精确而均匀地打开树脂和催化剂的流量

不需要给蓄能器充电，也不需要对喷枪进行冲洗

操作简单

英文介绍

MVP’s Chop/Wetout Equipment features the Pro System with reliable low pressure delivery, easy setup, easy operation, and easy maintenance. The Pro pumping system utilizes a heavy duty stainless steel catalyst pump, allowing the operator to adjust the preferred setting with ease. Catalyst settings can be made with a simple pin adjustment.

Designed to handle low-to-moderate volumes, the MiniPro Chopper is ideal for converting from hand lay-up to mechanization when the high-volume capacity of the UltraMAX™, or Patriot™ systems are not required. All Pro Series Choppers use the V-Pro 2000 highspeed reversing valve to ensure smooth changeover from top to bottom stroke.

The ATC-4000 Gun is recommended for this system. Available in Internal & External Mix configurations.

PRO CHOP/WET-OUT SYSTEM

Specifications:

Output Capabilities: approximately 1-5 lbs./min. (.45 – 2.3 kg/min.)

Catalyst Percentage: 0.5% to 3% by volume

Air Consumption: 12 CFM (340 L/min.)

Pump Ratio: 4:1 & 11:1

Maximum Air Input Pressure: 100 psi

Options:

CFH-2000

CB-8000 Monitor

CTS-9000 Catalyst Alarm

QUICK SHOT PAIL DISPENSE SYSTEM

Achieve excellent resin & catalyst metering while dramatically lowering material and labor costs normally associated with bucket and brush applications with the Quickshot. Dispense resin and catalyst quickly and more evenly with little clean-up and lower emissions.

Features of this system include:

Accurate ratios without the hassle

No drip, easy-to-use ball valve opens resin and catalyst flow precisely and evenly

No accumulators to charge, and no gun to flush

Simple to operate