产品简介

压缩空气GRP切割机CK40/900-A是一种专业的切割工具，具有吸力，可对GRP、CFRP和塑料进行无尘切割。因此，它被用于车辆、飞机和船只的建造，以及风力涡轮机制造商的转子叶片生产。但气动GRP切割器也可以很好地用于一般的塑料生产，或用于灯和开关柜的建设。

优点

圆盘直径为100毫米

15毫米的切割深度

最佳的切割速度

切削干净

刀具重量轻

用于安全引导刀具的支撑边缘

直接在原点进行有效除尘

CK40/1200-A压缩空气GRP切割机由于其圆盘直径为100毫米，因此是一种多功能的形状切割工具。由于其15毫米的切割深度，它可以切割塑料和GRP板，也可以通过调整好的切割速度，可靠地提供干净的切割，几乎不需要重新加工。该工具能有效地将不需要的、往往是对健康有害的粉尘直接吸入外部除尘系统中。良好的支撑边缘使这个轻巧的工具成为工业用途的精确和易于使用的工具。

技术规格

功率： - 400 W

速度： - 9000 min-1

卡盘： - 夹持卡盘 Ø 19 mm

启动。 - 阀杆

砂轮直径: - 100 mm

切割深度： - 15毫米

连接除尘： - Ø 27 mm

吸尘： - 外部吸尘

外壳 Ø: - 46 mm

长度: - 250 mm

重量: - 1.62 公斤

进气口: - G 1/4"

推荐的软管直径: - 9 mm

空气消耗量: - 10 l/s

声压级: - 81 dB(A)

振动： - < 2.5 m/s2

电流: - 气动

P_Max.最大压力: - 6.3 bar

英文介绍

The compressed air GRP cutter CK40/900-A is a professional cutting tool with suction for dust-free cutting of GRP, CFRP and plastics. Thus it is used in vehicle, aircraft and boat construction as well as in the rotor blade production of wind turbine manufacturers. But the pneumatic GRP-cutter can also be used well in general plastic production or in light and switch cabinet construction.

Benefits

Disc diameter of 100 mm

15 mm cutting depth

Optimum cutting speed

Clean cut

Lightweight tool

Support edge for safe tool guidance

Effective dust extraction directly at the point of origin

The CK40/1200-A compressed air GRP cutter is a versatile tool for form cutting thanks to its disc diameter of 100 mm. With its 15 mm cutting depth, it cuts plastic and GRP plates also due to the well-adjusted cutting speed and reliably delivers clean cuts that hardly require reworking. The tool effectively sucks the unwanted, often health-damaging dusts into an external dust extraction system directly at the point of origin. The good supporting edge makes this light and handy tool a precise and easy to use tool for industrial use.

Technical specifications

Power: - 400 W

Speed: - 9000 min-1

Chuck: - Clamping chuck Ø 19 mm

Start: - Valve lever

Wheel Ø: - 100 mm

Cutting depth: - 15 mm

Connection dust extraction: - Ø 27 mm

Dust extraction: - external dust extraction

Housing Ø: - 46 mm

Length: - 250 mm

Weight: - 1.62 kg

Inlet air connection: - G 1/4"

Recommended hose Ø: - 9 mm

Air consumption: - 10 l/s

Sound pressure level: - 81 dB(A)

Vibration: - < 2.5 m/s2

Current: - Pneumatic

P_Max. Betriebsdruck: - 6.3 bar