产品简介

这是一款特别方便、轻巧的机器，用于裁剪各种纺织品，裁剪层高可达约 8 毫米（视材料类型而定）。特别适用于羊毛和软质材料。可使用平底或切割滑板。润滑器可减少刀片和对刀之间的摩擦，从而切割层压织物。

Novita Plus 全绝缘，通过了 VDE 测试。特殊的组合齿轮机构使机器在整个负载范围内都具有独特的电机转速强度。电机仅有适度发热，防止过载，确保最高的保护和使用寿命。刀片防护罩可轻松进行无级调节，不会影响刀片的可视性。打磨装置的操作手柄采用了独特的设计，即使在切割操作过程中，单手也能打磨刀片。机器的操作和管理简便、平衡。

技术参数

电机功率： - 约 56 瓦

电机数据 - - 220 伏 / 50 赫兹

运行时间： - - 60 %（不间断运行）

电机转速（空转） - - 约 12.400 U/min

叶片速度（空转） - - 约 3.000 U/min

叶片直径： - 50 毫米

刀片磨损极限： - 约 42 毫米

切割高度： - 8 毫米

电机直径： - 约 50 毫米

机器长度： - 约 260 毫米

机器重量（不包括电缆）： - 约 850 克

振动： - < 2,5 m/s 运行噪音： - 73 dB(A)

英文介绍

A particularly convenient and lightweight machine for cutting all kinds of textiles for layers and up to approx. 8 mm high, depending on the type of material. Especially suitable for wool and soft materials. Either the flat base or the cutting skid may be used. The lubricator decreases friction between the blade and counter blade, enabling laminated goods to be cut.

The Novita Plus is fully insulated and VDE tested. A special combination gear mechanism gives the machine a unique motor speed strength across the entire load range. The motor only gets moderately warm, preventing overload and guaranteeing the highest protection and service life. The blade guard is easily and infinitely adjustable and does not obscure blade visibility. The operating handle for the grinding device has been shaped in such a way, that the blade can be sharpened using one hand, even during the cutting operation. Handling and management of the machine is easy and balanced.

TECHNICAL DATA

Motor power: - - approx. 56 Watt

Motor data: - - 220 V / 50 Hz

Operating time: - - 60 % (no non-stop operating)

Motor speed (idle): - - approx. 12.400 U/min

Blade speed (idle): - - approx. 3.000 U/min

Blade diameter: - - 50 mm

Blade wear limit: - - approx. 42 mm

Cutting height: - - 8 mm

Motor diameter: - - approx. 50 mm

Machine length: - - approx. 260 mm

Machine weight, excl. cable: - - approx. 850 g

Vibration: - - < 2,5 m/s Running noise: - - 73 dB(A)